Hidden camera

Submit your installation of IP camera EDIMAX IC-1510 hidden in a wall clock. First disassemble the clock mechanism and remove the part of the basis to which is fixed. After that put the board so that it is possible maximum adhesion to the board at the clock below the sticker with the numbers. At this point it may be attached with heatshrink to mount both the power connector and the Internet (RG45). Make a hole - carefully - for UTP cable that will pass along the clock mechanism. It is also desirable to use two wires on LAN power cord. When assembling the foil with the numbers needed to drill a hole about 2 to 3 millimeters is the place where you will mount the camera and lie. It is desirable to use a cable which is thin enough, and may be hidden behind the wall - not suspicious. Overall, the opening is so small that they are not visible from distance. It is possible to remove the battery and place the cable to spend place but the clock will not work. It is not that important.